Movable Hydrogen Generation Devices

With a rapid development of industries like refined chemicals, intermediates used by pharmaceuticals, electronics, etc., hydrogen gas requirement is increased daily which needs a movable hydrogen generation device to get on demand. The features of Hydrogen gas requirement by these industries are normally for a small gas volume with high purity, especially for very low content of impurities. The device uses catalytic combustion technology with small footprint and compact structure.

The Device is standardized, which is supplied in a complete set and easy to transport and install;
Mature production technology which can be operated safely and reliably;
Easy to purchase, transport and store the feedstock;
Process flow is short and simple;
Both production cost and energy consumption are low;
Less investment which can be recovered in a short period;
The operation and control are simple and easy.

Methanol Reforming Based Device Technical Index

Production Scale	5m³/h	10m³/h	15m³/h	20m³/h	25m³/h	50m³/h
H2 Purity	H2> 99.999%, CO < 1ppm, Dew Point < -50℃
Raw Material	Methanol and Demineralized water mixed solution, 52%(±2) Methanol mass content
Heating system	Methanol
Pressure	< 0.7MPa(G)
Power Interface	220VAC, 50Hz, Single Phase
Power Consumption	< 600w	< 1.1kw	< 1.6kw	< 2.2kw	< 2.7kw	< 5kw
System Noise	< 65dB
Lifespan	Devices 10yrs, Adsorbents 10yrs, Catalysts > 10,000hrs
H2 Production Model	Onsite
Onsite Environment	-20 ~ 45℃
Safety Requirements	Non Explosion-proof	According with GB50177 (Safety distance is in client's scope)
Cooling System	Water-cooling / Air-cooling
Mixture Solution System	Nil / Optional
MeOH Consumption	0.78kg/Nm³	0.78kg/Nm³	0.78kg/Nm³	0.76kg/Nm³	0.76kg/Nm³	0.76kg/Nm³
H2 Buffer Tank	10L	20L	29L	29L	45L	100L
Location	Indoor / Outdoor
Size(cm)	60x80x130	80x100x180	80x120x180	120x120x180	120x120x200	200x200x250

Natural Gas Based Device Technical Index

Production Scale	50m³/h	100m³/h	200m³/h
Purity	H2 > 99.999%, CO < 1ppm,
Raw Material	Natrual Gas / LNG
Pressure	0.8 ~ 1.4MPa(G)
NG Consumption	0.45Nm³(NG)/Nm³(H2)
Power Interface	220V / 380V
Power Consumption (Exclude RM Compressor)	< 5kw	< 8kw	< 15kw
System Noise	< 65dB
Lifespan	Device lifespan > 10,000hrs, Catalysts > 10,000hrs, Adsorbents > 100,000hrs
H2 Production Model	Onsite
Onsite Environment	-20 ~ 45℃
Safety Requirement	According with GB50177 (Safety distance is in client's scope)
Cooling System	Water-cooling / Air-cooling
Location	Indoor / Outdoor
Device Installation	Cabinet Type	Skid-mounted & overall transport